Praxis Works Innenlager Sram GXP Kurbel in 68mm BB30/PF30 Rahmen
Innenlager zur Montage von SRAM/Truvativ/Quarq Rennradkurbeln mit 24mm GXP Achse oder Praxis Works M24 Kurbeln in Rennradrahmen mit BB30/PF30 Lagersitz.
Das patentierte Praxis Works Rubber-Collet sorgt für knarz- und knackfreien Sitz, die verbauten high-end Kugellager von Enduro Bearings für weichen Lauf und höchste Zuverlässigkeit.
Material Schale: Aluminium 7075 T6
Lagertyp: Enduro Bearings 2437 Drive side / 2237ER non-Drive side
Lagertyp: Enduro Bearings (24mm drive side / 22mm non-drive side)
Für die Montage wird ein Standard M24 oder GXP BB Tool (z.B. Shimano TL-FC33 oder TL-FC36) benötigt
COMPATIBILITY
FRAME TYPE : This specific press fit M24 bottom bracket is made to be installed in a 68mm BB30 or PF30 Road frame.
BEARINGS : Praxis M24 bottom brackets have a 24mm Drive and a 22mm NonDrive Bearing. These are specifically made for use with Praxis Road M24 spindle cranks or SRAM Road GxP spindle cranks. A drive-side wave washer is used for preload of the bearings.
TOOL : This specific M24 bottom bracket requires two 16 notch traditional BB tools along with a press tool/drift for installation. Please read the instructions carefully for installation. Use any standard outboard cup BB tool with 16 external notches and a 44mm ID